Queenslander Architecture | Emil's Painting

Queenslander architecture


Queenslander architecture is a modern term for the vernacular type of architecture of Queensland, Australia. It is also found in the northern parts of the adjacent state of New South Wales and shares many traits with architecture in other states of Australia but is distinct and unique. The form of the typical Queenslander style residence distinguishes Brisbane’s suburbs from other capital cities.

The type developed in the 1840s and is still constructed today, displaying an evolution of local style. The term is primarily applied to residential construction, although some commercial and other types of construction are identified as Queenslander.

Queenslander House - Painting Service Brisbane  


Queenslander buildings are primarily of timber construction and can be low or high-set, one to two storeys. They are typically “tripartite” in sectional composition; underfloor (stumps), primary rooms (can be two levels), and roof. All have one or more veranda spaces, a sheltered edge of the building that is typically only part-enclosed and used as another living zone. This consideration for climate is the defining characteristic of the Queenslander type.

The raising of the main living spaces off the ground can be seen as both a stylistic and practical device. The vertical “stumps”, initially of timber, allow the building to “float” above the terrain. Queenslanders all have this underfloor area that is used to cool the building through ventilation and also for protection of the main structure from termite attack and other pests. The stumps also help to overcome any variations in the terrain that would normally require earthworks to flatten for construction and allow for the natural flow of water across the terrain in the event of excessive rain and downpours. The underfloor space is often high enough for additional uses such as storage, carport or even as extra living area in the cool, dark spaces beneath the building. The underfloor area was sometimes decoratively screened at the perimeter with timber battens. Another advantage of being constructed on stumps is that the buildings are highly adaptive. It is relatively easy to raise, lower, reorient or completely relocate Queenslanders. The main living areas of the house, being raised from the terrain, are a series of rooms on a platform floor. Traditionally, planning and fenestration encouraged cross-ventilation for passive cooling in a variety of innovative methods including fanlights, ceiling roses, and alignment of doors and windows to allow uninterrupted air flow. The verandah is the most typical inclusion in the plan and can be used day and night as a semi-external living space. In Brisbane, many people have tables and chairs for dining and a daybed or ‘sleepout’ on their verandah. Revolving tin cylinders placed on roofs allow for hot air to be drawn out of ceiling spaces.

The roof is a large and visible presence externally and was traditionally steeply pitched. They are of varied materials including slate and tiles but are most characteristically sheeted with corrugated iron. The iron roofs could withstand torrential rains and be re-used if damaged by cyclonic winds.

Typically, the Queenslander is suited to the sub-tropical climate of Queensland of high rainfall and mild to hot, humid climate with average summer temperatures in the range of 23–36 degrees Celsius (73–97 degrees Fahrenheit). However, the type is found across the state in colder and hotter locations usually with adaptations to suit.

Owing to their simplicity of construction, standardised designs were produced through the 1920s and 1930s. Despite these advantages, tastes changed and the style fell out of favour after the Second World War. The need for cheaper homes first saw large verandahs reduced to small landings. Subsequently, internal walls were no longer made of timber and were made of fibreboards, such as asbestos sheeting or fibre/gypsum panels. Additionally, after the war, surplus military earthmoving equipment became common and it was then possible to cheaply prepare sites for construction and the relative cheapness of construction on stumps diminished.Land availability decreased and preferences moved towards lower maintenance types of housing. These factors led to the adoption in Queensland, as elsewhere, of the ubiquitous “modern” American style, usually single level and usually sold as a combined land and home package. These newer homes are usually made with a timber or metal frame but with a brick veneer.

The Queenslander, a “type” not a “style”, is defined primarily by architectural characteristics of climate-consideration. They have been constructed in the popular styles of the time including, but not limited to colonial, Victorian, Federation, Arts and Crafts/Art Nouveau, Interwar styles, and Post-World War II styles. The Queenslander is popularly thought of as an “old” house although Queenslanders are constructed today using modern styles as well as “reproductions” of previous styles.

Ashgrovian Architecture 71 Royal Pde St Johns Wood, Ashgrove 1937
Ashgrovian is the term coined for a variation of the Queenslander built between the late 1920s and World War II in the suburb of Ashgrove in Brisbane, Queensland, Australia. The term Ashgrovian was coined from the prolific number of these dwellings constructed in the Interwar period and was an adaptation of the Bungalow style which was popular in the early parts of the 20th century. Extremely popular with middle-income earners, these dwellings were almost always fronted with a grand gable roof, often surrounded by secondary smaller gables behind. The smaller gables usually sheltered verandahs and sleep-outs. A staircase almost always dominated the front yard leading to the verandah which in later years was commonly filled in to form extra rooms. Other late additions included projecting bay or box seat windows usually centrally located in the front of the house.

Many old Queenslander buildings, both residential and commercial, have been demolished to make way for more modern buildings, particularly in the inner urban area of Brisbane contributing to Brisbane’s gentrification. However, community awareness of urban heritage has seen local governments implement conservation measures to protect the unique ‘tin and timber’ character of neighbourhoods and towns dominated by Queenslander architecture. While master-planned housing estates are indistinguishable from those in other states, many custom-built homes are designed in a more modern version of the Queenslander style, particularly holiday houses in coastal areas. Many Queenslander style homes are being removed/relocated to save them from demolition when the land is being developed.

Some elements of Queenslander house architecture can be found in some highrise buildings. Early highrise buildings had narrow balconies that were mostly used for cleaning the outside of windows. In Queensland, highrise balconies gradually evolved to become wide outdoor living spaces of the quality of verandahs and the back decks of Queenslander houses.
From Wikipedia, the free encyclopedia